Geekpure 150 GPD Reverse Osmosis RO Replacement Membrane Filter-NSF Certificated

The HIDROTEK Reverse Osmosis (RO) Membrane offers high-efficiency filtration, rejecting impurities down to 0.0001 microns and removing up to 98% of contaminants from the water source (minimum rejection rate of 96%). It can effectively remove particles of heavy metals, such as fluoride, calcium, magnesium, lead, chromium, and nitrates, as well as over 1,000 other contaminants.

Designed for residential use, the RO membrane meets the NSF/ANSI Standard 58 certification, ensuring it adheres to universal industry standards. Its standard size dimensions of 11.75" overall length and 1.75" diameter allow it to fit most 2" ID membrane housings, making it a versatile choice for various RO and water filtration systems.

The product's operational specifications include: - Feed Water Pressure: 35 - 100 PSI - Temperature: 40 - 110°F/5-45°C - pH: 3.0 -11.0 - Maximum TDS: 1,000 mg/L - Turbidity: < 1.0 NTU - Maximum SDI: < 4.0 - Hardness: < 5 GPG - Iron: < 0.1

With a typical lifespan of 15-24 months, depending on feed water quality, the RO membrane offers a reliable and long-lasting filtration solution. Its shelf life is 2 years when stored in the original sealed package.

It is important to note that the membrane should not be frozen, and a 30-minute flushing is recommended upon first use to remove any protective materials.

If the water source is chlorinated, it is advised to use a carbon/sediment pre-filter to prevent the residual chlorine from damaging the membrane. For areas with high water hardness, a water softener is recommended to be installed before the RO unit.

The HIDROTEK RO membrane provides a wastewater ratio of 1:2, meaning that for every gallon of pure water produced, 2 gallons of wastewater will be generated.

Regarding replacement, the RO membrane can accommodate feed water with TDS levels up to 2,000 ppm, but it is recommended to replace the membrane every 12 months or more frequently in such cases. For feed water with TDS below 1,000 ppm, the suggested replacement interval is 24-36 months.

The package includes two 150 GPD RO membranes. Additional components, such as membrane housing, wrench, and flow restrictor, can be purchased separately.

The product's performance may vary depending on factors like temperature, water pressure, and feed water quality, which can affect the pure water capacity and quality.

In summary, the HIDROTEK RO Membrane offers high-efficiency filtration, universal compatibility, and a reliable long-term performance, making it a suitable choice for residential reverse osmosis and water filtration systems.

product information: