Geekpure Reverse Osmosis RO Membrane 50 GPD - NSF Certified - Water Filter Replacement - Pack 4

The Hidrotek Reverse Osmosis (RO) Membrane is designed to meet various water quality requirements for residential use. The operation specifications are as follows:

FEED WATER PRESSURE: 35 - 100 PSI TEMPERATURE: 40 - 110°F/5-45°C pH: 3.0 -11.0 MAX TDS: 1000 MG/L TURBIDITY: < 1.0 NTU MAX SDI: <4.0 HARDNESS: < 5 GPG IRON: <0.1

The product's lifespan is typically 15-24 months, depending on the feed water quality. The shelf life is 2 years in the original sealed package.

Please note the following: 1. DO NOT FREEZE the membrane. 2. Flush the new membrane for 30 minutes, as there is a protective material inside that needs to be removed. This will ensure the TDS of the pure water reaches the right level. 3. If the water is chlorinated, it is recommended to use a Carbon/Sediment Pre-Filter, as the residual chlorine can damage the membrane. If the water hardness is too high, it is advisable to install a water softener before the RO unit.

Why choose the Hidrotek RO Filtration System? 1. HIGH EFFICIENT FILTRATION: The Hidrotek RO membrane rejects impurities down to 0.0001 micron, providing high permeated flow and stable salt rejection. It can remove up to 98% of contaminants in the water (minimum rejection of 96%), including heavy metals (primarily fluoride, calcium, magnesium, lead, and nitrates) and over 1000 other contaminants. 2. UNIVERSAL STANDARD SIZE: The Hidrotek RO membrane is a standard size (11.75" Overall Length, 1.75" Diameter) and fits all standard 2" ID membrane housings, making it compatible with most residential RO systems and water filtration systems. 3. WASTEWATER RATIO: The Hidrotek RO system has a wastewater ratio of 1:2, meaning 2 gallons of waste water are produced for every 1 gallon of pure water. 4. NSF CERTIFICATION: The Hidrotek RO membrane is NSF-certified, ensuring it meets the highest quality standards.

Frequently Asked Questions: Q: What is the dimension of the RO membrane? A: The Hidrotek RO membrane has a standard size of 11.75" Overall Length and 1.75" Diameter, fitting all standard 2" ID membrane housings.

Q: What is the membrane's lifetime? A: For most tap water (200-500 ppm), the suggested lifetime is 24 months. The actual lifespan depends on usage and feed water quality. For water with less than 200 ppm, the membrane may last up to 36 months. In hard water areas, the membrane may need to be replaced every 6-12 months.

Q: Can I use this membrane if my water has a Total Dissolved Solids (TDS) over 1000 ppm or very hard well water? A: Yes, you can use the Hidrotek RO membrane even if the TDS reaches 2000 ppm, but the membrane should be replaced more frequently, such as every 12 months or more often. For TDS less than 1000 ppm, the suggested lifespan is 24 months.

product information: