Geekpure Reverse Osmosis RO Membrane 50 GPD - Pack 2

Reverse Osmosis Filtration System: Product Description and Specifications

Feed Water Specifications: - Pressure: 35 - 100 PSI - Temperature: 40 - 110°F/5-45°C - pH: 3.0 -11.0 - Maximum TDS: 1000 MG/L - Turbidity: < 1.0 NTU - Maximum SDI: <4.0 - Hardness: < 5 GPG - Iron: <0.1

Product Lifetime and Shelf Life: - Membrane Lifetime: 15-24 months, depending on feed water quality - Shelf Life: 2 years in original sealed package

Important Notes: 1. DO NOT FREEZE the membrane. 2. Flush the new membrane for 30 minutes before use, as there is protective material inside. 3. For chlorinated water, use a Carbon/Sediment Pre-Filter to protect the membrane. 4. If water hardness is high, install a water softener before the RO unit.

Why Choose Reverse Osmosis Filtration? The HIDROTEK RO membrane rejects impurities down to 0.0001 micron, providing highly efficient filtration. It can remove up to 98% of contaminants (minimum 96% rejection) such as heavy metals, fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates. The HIDROTEK RO system is NSF/ANSI Standard 58 certified, ensuring quality and safety. Its universal standard size (11.75" length, 1.75" diameter) fits most residential RO systems. The wastewater ratio is 1:2, meaning 2 gallons of wastewater are produced for every 1 gallon of pure water.

Why Choose HIDROTEK Brand? - High-efficiency filtration with NSF-certified thin-film composite RO membrane - Higher water production rate compared to standard RO membranes - Universal standard size for easy installation in most RO systems

FAQs: Q: What are the dimensions of the RO membrane? A: The membrane dimensions are 11.75" overall length and 1.75" diameter, fitting standard 2" ID membrane housings.

Q: What is the membrane's lifetime? A: For most tap water (200-500 ppm TDS), the suggested lifetime is 24 months. The actual replacement frequency depends on usage and feed water quality. For water under 200 ppm TDS, the membrane may last up to 36 months. In hard water areas, replacement may be needed every 6-12 months.

Q: Can I use this RO system if my water TDS is over 1000 ppm or the water is very hard? A: Yes, you can use this RO system even if the TDS reaches 2000 ppm, but the membrane should be replaced more frequently, around every 12 months or sooner.

Q: Can this RO system be used for brackish water (5000 ppm) or seawater (35,000 ppm)? A: No, this RO system is designed for residential tap water use only. For brackish or seawater applications, please contact Geekpure for industrial-grade RO membranes.

Q: What's included in the package? A: The package contains 2 x 50 GPD RO membranes. Additional components like membrane housings, wrenches, and flow restrictors need to be purchased separately.

product information: