Geekpure 20-Inch Clear Filter Housing for Whole House Water Filtration System

This 20-inch whole house water filter housing is a complete set that includes a plastic wrench, screws, and a metal bracket. It is compatible with most standard 2.5-inch by 20-inch filters, but does not fit the larger blue housings measuring 4.5 inches by 20 inches.

Key features of this filter housing: - Maximum operating pressure of 90 psi (6.2 bar) - Suggested work pressure of 50-60 psi - Operating temperature range of 40-110°F (5-45°C) - Shelf life of 5 years - Flow rate of 5-15 GPM, depending on the feed water pressure

Important notes: 1. If your water pressure exceeds 80 psi, a pressure regulator must be installed before the filter housing to prevent the maximum pressure rating from being exceeded. It is recommended to set the pressure regulator to 60 psi or less.

1. When installing the inlet/outlet fittings, wrap them with enough PTFE (Teflon) tape, followed by a layer of joint compound or other sealant for metal and stainless steel fittings, then more PTFE tape. This helps to prevent any leaks.

2. Before reinstalling the filter cartridges, remove them from the caps, clean the O-ring surfaces, and re-lubricate the O-rings. Proper seating of the O-rings is crucial to maintain a water-tight seal.

3. Use the included wrench to tighten the housing firmly. For first-time installation, refer to online videos for guidance on whole house water filter system setup.

4. Protect the filter housing from freezing temperatures.

5. When replacing the filters, run the water for 10-15 minutes. It is normal for some black carbon fines to appear during the initial flushing, and this water should be discarded.

Matched filter cartridges and parts: - PP spun filter: Removes sand, dirt, and sediment (6-month lifespan) - Granular carbon filter: Further removes chlorine, taste, and odors (6-month lifespan) - Carbon block filter: Further removes chlorine, taste, and fine particulates (6-month lifespan)

The filter cartridge lifespan depends on usage and feed water quality.

Additional Geekpure filter housing and cartridge options: - 4.5-inch x 20-inch and 4.5-inch x 10-inch whole house filter housings - 4.5-inch x 20-inch, 4.5-inch x 10-inch, and 2.5-inch x 10-inch filter cartridges

This 20-inch slim clear housing with a 3/4-inch NPT brass port, pressure relief button, plastic wrench, and metal bracket provides a standard solution for whole-house water filtration, reverse osmosis, and commercial applications. It offers a 1-year warranty and a 5-year shelf life.

product information: