Geekpure 50 GPD RO Membrane Replacement Filter - NSF Certified

The Reverse Osmosis (RO) Filtration System by Hidrotek offers high-efficiency water purification, removing up to 98% of contaminants. With its universal standard size (11.75" length, 1.75" diameter), the Hidrotek RO membrane fits most residential RO systems.

Key Specifications: - Feed Water Pressure: 40-100 PSI - Temperature: 40-110°F/5-45°C - pH: 3.0-11.0 - Maximum TDS: 1000 mg/L - Turbidity: < 1.0 NTU - Maximum SDI: <4.0 - Hardness: < 5 GPG - Iron: <0.1

The Hidrotek RO membrane has a lifespan of 15-24 months, depending on feed water quality. Its shelf life is 2 years when stored in the original sealed package. Important notes: 1. Do not freeze the membrane. 2. Flush the new membrane for 30 minutes to remove any protective materials. 3. For chlorinated water, use a carbon/sediment pre-filter to protect the membrane. For high-hardness water, install a water softener before the RO unit.

Why choose the Hidrotek Reverse Osmosis Filtration System? 1. High Efficiency: The RO membrane rejects impurities down to 0.0001 micron, with a minimum rejection rate of 96%. 2. Universal Fit: The standard size (11.75" length, 1.75" diameter) fits most residential RO systems. 3. Wastewater Ratio: The system produces 2 gallons of wastewater for every 1 gallon of pure water. 4. Certifications: The NSF/ANSI Standard 58 certified thin-film composite RO membrane ensures high water production.

Frequently Asked Questions: Q: What are the membrane dimensions? A: The standard size is 11.75" overall length and 1.75" diameter, fitting 2" ID membrane housings.

Q: What is the membrane's lifespan? A: For most tap water (200-500 ppm TDS), the suggested lifespan is 24 months. The actual lifespan depends on usage and feed water quality. For high-quality water (< 200 ppm TDS), the membrane may last up to 36 months. In hard water areas, it may need to be replaced every 6-12 months.

Q: Can I use it if my water TDS exceeds 1000 ppm or has very hard well water? A: Yes, you can use the Hidrotek RO membrane even with TDS up to 2000 ppm, but you should replace the membrane every 12 months or more frequently. For TDS less than 1000 ppm, we recommend this system.

Q: Can this be used for brackish water (5000 ppm) or ocean water (35,000 ppm)? A: No, this RO membrane is designed for residential tap water use. For brackish or ocean water applications, please contact Geekpure for suitable industrial-grade RO membranes.

Q: What's included in the package? A: The package contains 1 piece of the RO membrane. Additional components like membrane housing, wrench, and flow restrictor need to be purchased separately.

The product water capacity and quality can vary depending on temperature, water pressure, and feed water quality. This is why you may notice lower pure water capacity in the winter and higher in the summer.

product information: